Reverse DNS XML Schemas: XML Schemas for Reverse DNS Management

Independent Submission                                      T. Manderson
Request for Comments: 7745                                         ICANN
Category: Informational                                     January 2016
ISSN: 2070-1721


                 XML Schemas for Reverse DNS Management

Abstract

   This document defines an Extensible Markup Language (XML) schema for
   reverse DNS management in a tightly controlled Representational State
   Transfer (REST) environment.  This document describes a schema that
   has been developed and deployed by ICANN in a "RESTful" system since
   2011 and is being used by the registries responsible for reverse DNS
   (rDNS) delegations underneath IN-ADDR.ARPA and IP6.ARPA through an
   HTTPS transaction that is mediated by an X.509 certificate.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This is a contribution to the RFC Series, independently of any other
   RFC stream.  The RFC Editor has chosen to publish this document at
   its discretion and makes no statement about its value for
   implementation or deployment.  Documents approved for publication by
   the RFC Editor are not a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7745.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   3
   3.  Implementation  . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   5
   5.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   5
     5.1.  Normative References  . . . . . . . . . . . . . . . . . .   5
     5.2.  Informative References  . . . . . . . . . . . . . . . . .   6
   Appendix A.  Schema Definition for rDNS Updates . . . . . . . . .   7
   Appendix B.  Schema Definition for rDNS Queue Entries . . . . . .   8
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  10
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  10

1.  Introduction

   This document defines an Extensible Markup Language (XML) schema for
   reverse DNS management in a tightly controlled Representational State
   Transfer (REST) [REST] environment.  This document describes a schema
   that has been developed and deployed by ICANN in a "RESTful" system
   since 2011 and is being used by the registries responsible for
   reverse DNS (rDNS) delegations underneath IN-ADDR.ARPA [RFC1034] and
   IP6.ARPA [RFC3596] through an HTTPS [RFC2818] transaction that is
   mediated by an X.509 [RFC5280] certificate.

   As DNSSEC [RFC4033] adoption progresses, the necessity to interact
   with a delegation in the IN-ADDR.ARPA and IP6.APRA zones becomes more
   frequent given that updates to DS records in the parent zone for
   child delegations follow the key rollover and expiry of the child
   zone.  The modification of such critical areas at a relative high
   frequency requires a system that allows the administrative holders of
   such delegations to make such changes in a secure and trustworthy
   manner where the chain of trust for submitting the necessary
   information remains unbroken between the IN-ADDR.ARPA and IP6.APRA
   zone maintainers and the zone customers.

   At the request of the Regional Internet Registries (RIRs) to automate
   reverse DNS updates with ICANN, a REST-based HTTPS service was
   deployed that:

   o  Provides for a secure, authenticated mechanism to update zone data
      (NS and DS records)

   o  Provides a well-formed data structure for both the IN-ADDR.ARPA
      and IP6.ARPA zones

   o  Allows for "out-of-band" acknowledgement and notification of
      updates

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

3.  Implementation

   The implemented system allows the entity responsible for its rDNS
   delegations to effect changes in the reverse DNS zones IN-ADDR.ARPA
   and IP6.ARPA by submitting an XML document to an atomic RESTful
   service via an HTTPS [RFC2818] connection.  In this service, the
   HTTPS layer provides the end-to-end security of the transaction, and
   it further provides authentication by use of mandatory X.509
   [RFC5280] client certificates with a known server certificate issued
   by a Certification Authority administered by the service operator.

   Certificates for use in this system, issued by the system operator,
   are specific to the entity responsible for the delegations in the
   zone.

   Updates are made to the system by using the HTTP GET, PUT, and DELETE
   operations over HTTP 1.1 [RFC7231] via HTTPS [RFC2818] only.  These
   operations are sent to a resource Uniform Resource Identifier (URI)
   in the form of:

           https://host.example.org/<ipversion>/<zone>

   A synthetic example of an XML document submitted to the deployed
   system might take the following form (including all optional
   attributes) as per the schema in Appendix A.

   <zone xmlns="http://download.research.icann.org/rdns/1.1"
     name="10.in-addr.arpa" cust="IANA" ipversion="ipv4"
     version="1.1" modified="2012-01-18T01:00:06"
     state="active" href="https://host.example.org/ipv4/10">
     <nserver>
       <fqdn>BLACKHOLE-1.IANA.ORG.</fqdn>
     </nserver>
     <nserver>
       <fqdn>BLACKHOLE-2.IANA.ORG.</fqdn>
     </nserver>
     <ds>
       <rdata>33682 5 1 ea8afb5fce7caf381ab101039</rdata>
     </ds>
     <ds>
       <rdata>33682 5 2 7d44874f1d93aaceb793a88001739a</rdata>
     </ds>
   </zone>

   When PUT and DELETE operations are used, the well-formed XML is
   required to be sent with the appropriate content-length headers.  The
   GET operation requires only the URI.

   One requirement of the system was to allow the separation of update
   and approval with an out-of-band notification mechanism.  When such
   options are configured for a customer of the service, submitted
   updates may be queued for later approval.  When a customer has queued
   updates pending approval, the customer may submit a GET request to
   retrieve either an individual entry or a full listing of all queued
   entries.

   To fetch a listing of the customer's queue, the customer would GET a
   URI in the form of:

           https://host.example.org/queuelist

   To fetch an individual queue entry, the customer would GET the
   canonical URL (as per the schema) for this queue record:

           https://host.example.org/queue/<identifier>

   Where <identifier> is a system-generated and system-specific value
   that identifies this particular queue entry.  All XML returned from
   queue-based operations ('queue' and 'queuelist') would return an XML
   document following the specification in Appendix B.  A synthetic
   example from a GET of 'queuelist' would be:

   <queuelist xmlns="http://download.research.icann.org/rq/1.0"
    version="1.0">
    <queue xmlns="http://download.research.icann.org/rq/1.0"
     name="10.in-addr.arpa" cust="IANA" ipversion="ipv4"
     version="1.0" submitted="2013-01-11T05:22:15"
     state="pending" method="PUT"
     ack="https://host.example.org/ack/25a531f50e5ba45"
     href="https://host.example.org/queue/25a531f50e5ba45">
     <nserver>
       <fqdn>BLACKHOLE-1.IANA.ORG.</fqdn>
     </nserver>
     <nserver>
       <fqdn>BLACKHOLE-2.IANA.ORG.</fqdn>
     </nserver>
     <ds>
       <rdata>33682 5 1 ea8afb5fce7caf381ab101039</rdata>
     </ds>
     <ds>
       <rdata>33682 5 2 7d44874f1d93aaceb793a88001739a</rdata>
     </ds>
    </queue>
   </queuelist>

4.  Security Considerations

   This document provides an XML schema for facilitating the management
   of reverse DNS delegations in the IN-ADDR.ARPA and IP6.APRA zones.
   The schema itself contains no authentication data, and all other
   information contained is considered public data as it is either
   published in DNS or propagated to other public information sources
   like WHOIS.

   The system that implements this XML schema requires HTTPS to be used
   and also uses known server and client X.509 certificates for
   authentication to protect against message modification, message
   insertion/deletion, man-in-the-middle, and replay attacks.  Any
   DoS-type attack vectors and the authorisation of which delegations
   the X.509 certificate authentication sessions can affect are out of
   scope for this document.

5.  References

5.1.  Normative References

   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
              STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
              <http://www.rfc-editor.org/info/rfc1034>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC2818]  Rescorla, E., "HTTP Over TLS", RFC 2818,
              DOI 10.17487/RFC2818, May 2000,
              <http://www.rfc-editor.org/info/rfc2818>.

   [RFC3596]  Thomson, S., Huitema, C., Ksinant, V., and M. Souissi,
              "DNS Extensions to Support IP Version 6", RFC 3596,
              DOI 10.17487/RFC3596, October 2003,
              <http://www.rfc-editor.org/info/rfc3596>.

   [RFC4033]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "DNS Security Introduction and Requirements",
              RFC 4033, DOI 10.17487/RFC4033, March 2005,
              <http://www.rfc-editor.org/info/rfc4033>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <http://www.rfc-editor.org/info/rfc5280>.

   [RFC7231]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
              DOI 10.17487/RFC7231, June 2014,
              <http://www.rfc-editor.org/info/rfc7231>.

5.2.  Informative References

   [RELAXNG]  The Organization for the Advancement of Structured
              Information Standards (OASIS), "RELAX NG Compact Syntax",
              November 2002, <https://www.oasis-open.org/committees/
              relax-ng/compact-20021121.html>.

   [REST]     Fielding, R., "Architectural Styles and the Design of
              Network-based Software Architectures", PhD
              Dissertation, University of California, Irvine,
              ISBN 0-599-87118-0, 2000.

Appendix A.  Schema Definition for rDNS Updates

   The following Schema, used for PUT, GET, and DELETE operations, is an
   XML document using the RelaxNG Compact [RELAXNG] specification.

   default namespace = "http://download.research.icann.org/rdns/1.1"

   # A document may either be a single zone (update) or
   # a collection of zones (view)
   start = zone | zonelist | zonereflist

   # A list of zone names for view only.
   zonereflist = element zonereflist {
     attribute version {
       xsd:decimal { minInclusive="1.1" fractionDigits="1" }
     },
     zoneref*
   }

   # A bulk list of zones for view only.
   zonelist = element zonelist {
     attribute version {
       xsd:decimal { minInclusive="1.1" fractionDigits="1" }
     },
     zone*
   }

   # A zone reference (accepted by REST engine for query)
   zoneref = element zoneref {
     attribute name { text },
     attribute href { xsd:anyURI }
   }

   # A single zone record
   zone = element zone {
     # The zone record's name, e.g., 10.in-addr.arpa
     attribute name { text },
     # The customer (optional); derived from known state.
     attribute cust { text }?,
     # The canonical URL for this zone record (optional)
     attribute href { xsd:anyURI }?,
     # The IP version of the address for the zone record (optional)
     attribute ipversion { "ipv4" | "ipv6" }?,
     # The administrative state of the zone (optional)
     attribute state { "active" | "pending" | "error" }?,
     # The last modified timestamp in UTC (optional)
     attribute modified  { xsd:dateTime }?,
     # The schema version (optional)
     attribute version {
       xsd:decimal { minInclusive="1.1" fractionDigits="1" }
     }?,
     # A zone NS RRset MUST have at least two NS records
     nserver,
     nserver+,
     # It MAY contain some DS records
     ds*
   }

   # DNS-SEC records
   ds = element ds {
     # rdata MUST contain
     #  <Keytag> | <Algorithm> | <Digest type> | <Digest>
     # as per RFC 4034
     #
     element rdata { text }
   }


   # A single name server
   nserver = element nserver {
     # An nserver entry MUST contain a DNS FQDN
     # for a NS RR (RFC 1035)
     element fqdn { text }
   }

Appendix B.  Schema Definition for rDNS Queue Entries

   The XML schema definition below, in RelaxNG Compact [RELAXNG] form is
   used for queue interaction operations.

   default namespace = "http://download.research.icann.org/rq/1.0"

   # A document MAY either be a single queue entry
   #  or a collection of queued entries
   start = queue | queuelist

   # A list of zone names for view only.
   queuelist = element queuelist {
     attribute version {
       xsd:decimal { minInclusive="1.0" fractionDigits="0" }
     },
     queue*
   }
   # A single queued zone record
   queue = element queue {
     # The zone record's name, e.g., 10.in-addr.arpa
     attribute name { text },
     # The customer (optional); derived from known state.
     attribute cust { text }?,
     # The canonical URL for this queue record (optional)
     attribute href { xsd:anyURI }?,
     # The acknowledgement URL for this queue record (optional)
     attribute ack { xsd:anyURI }?,
     # The IP version of the address for the zone record (optional)
     attribute ipversion { "ipv4" | "ipv6" }?,
     # The state of the zone (optional); for a queue, it
     # SHOULD always be pending
     attribute state { "pending" }?,
     # The submitted timestamp (optional)
     attribute submitted  { xsd:dateTime }?,
     # The HTTP method used to update
     attribute method { "PUT" | "DELETE" },
     # The schema version (1.0) (optional)
     attribute version {
       xsd:decimal { minInclusive="1.0" fractionDigits="1" }
     }?,
     # A zone NS RRset must have at least two NS records
     nserver,
     nserver+,
     # It MAY contain some DS records
     ds*
   }

   # DNS-SEC records
   ds = element ds {
     # rdata MUST contain Flags | Protocol | Algorithm | Public Key
     # as per RFC 4034
     #
     element rdata { text }
   }

   # A single name server
   nserver = element nserver {
     # An nserver entry MUST contain a DNS FQDN
     # for a NS RR (RFC 1035)
     element fqdn { text }
   }

Acknowledgements

   An XML schema was initially provided by APNIC; however, necessity
   required a branch, and as such a new namespace and schema have been
   created.  Recognition goes to APNIC for prior efforts in this area.

   The author acknowledges feedback from a collective made up of various
   RIR technical folk; however, heartfelt thanks goes to Anand Buddhdev
   of the RIPE-NCC and Robert Loomans of APNIC for being both alpha and
   beta testers and providing valuable feedback.

Author's Address

   Terry Manderson
   ICANN

   Email: terry.manderson@icann.org